Timmo's RS

[timmo]

Now for sale- http://www.rslibertyclub.org/forums/showthread.php?t=87520

Righto people,here is some new,current pics as promised as my car has undergone some significant changes over the last few months.Some mild customising of bodywork and underbonnet detailing.

I have carried out a fair whack of mechanical mods too (Turbo,Brakes,Suspension etc) which is all listed in the spec's below the pics.

Some serious time and cash has gone into it of late and i'm pretty pleased with the results.

I had a bit of a play on Photoshop with one of the pics which i think turned out o.k.

Enjoy,
Timmo.

http://i118.photobucket.com/albums/o102/timmors/rspic1.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic3.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic2.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic7.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic8.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic6.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic5.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic4.jpg

http://i118.photobucket.com/albums/o102/timmors/pic2-1.jpg

http://i118.photobucket.com/albums/o102/timmors/IMG_2403.jpg

http://i118.photobucket.com/albums/o102/timmors/IMG_2404.jpg

http://i118.photobucket.com/albums/o102/timmors/IMG_1977.jpg

http://i118.photobucket.com/albums/o102/timmors/IMG_1983.jpg


Current Spec's;

Engine

EJ20T
Rotated VF23 Turbo
Custom Braided Turbo Oil Feed Line
Turbo Blanket
Hybrid Front Mount Intercooler
Custom Pipework
Hybrid/Turbosmart Silicone Adaptors and Hose Clamps
WRX Heads
3” Turbo Back Exhaust With Hi-Flow Cat And Magnaflow Twin Tip Muffler
Heat Wrapped Dump Pipe
Turbosmart Dual Port Blow Off Valve
Turbosmart E-Boost Electronic Boost Controller
Walbro Fuel Pump
MRT Alloy Header Tank
Odyssey Battery PC1200
Bosch Coils HEC-716
NGK Iridium Plugs
Apexi Pod
GReddy Turbo Timer
“RS Liberty” Alloy Radiator Splitter
Air Conditioning Retrofit
Group ‘N’ Engine Mounts
Apexi Power FC
Redline Water Wetter
Oil Catch Can and K&N Breather Filter
Upgraded Power and Earth Cables
Custom Pre-Turbo Intake
Bolts Replaced With Stainless Steel Allen Key Bolts
Custom Aluminium Battery Bracket With Stainless Rods
Modified And Colour Coded TT Engine Cover

Driveline

JDM 5 Speed
4.11 Front Diff/Gearbox
4.11 Rear Diff LSD
Exedy Clutch
Extreme Chromoly Flywheel
Redline Lightweight Shockproof Gear Oil in Box And Diff
Group ‘N’ Gearbox Mount
New Shifter Bushes and Spring
Modified Gear Shifter (Short Shift)

Suspension

Pedders Springs
Pedders Struts
Whiteline Sway Bars (Front 22mm Rear 20mm)
Whiteline HD Sway Bar Links And Chassis Mounts Front And Rear
JIC Front Strut Brace

Brakes

04 WRX 4 Pot Front Calipers
RDA Slotted/Dimpled/Anodized Front And Rear Rotors
EBC Heavy Duty Pads Front and Rear
Goodridge Braided Brake Lines
Cusco Brake Cylinder Support

Bodywork

Custom Pearl Green Full Respray 2007
Resprayed Black Window Moulds and Wipers
RS Tailgate Wing
RS Skirts and Bars
Colour Coded Body Moulds and Mirrors
STI Front Badge
Rolled Rear Guards
Tinted Windows- Darkest Legal
New Heavy Duty Custom Tailgate Struts
Mesh Grille with Badge Pod
Smoothed Out Bonnet Scoop
JDM Clear Side Indicators
JDM Tail Lights W/Clear Indicators
Stainless Steel Allen Key Guard Bolts

Wheels

18x7.5” Gestalt Virouge GV1
215/35/18 Nankang NS11 Tyres

Interior

MY05 WRX Seats
Pioneer 600w Amp
LX Liberty 1.5 Din Pocket
Pioneer MP3 Head Unit
2x12” Pioneer Boxed Subs
Pioneer 6x9” Rears
Pioneer 6” Splits Front
Fire Extinguisher
Mongoose Alarm
MOMO Challenger Pedals
MOMO Corse Pilota Steering Wheel
Autometer Sport-Comp Air/Fuel Ratio Gauge
Autometer Sport-Comp Oil Pressure Gauge
Autometer Sport-Comp Boost Gauge

[Al]

I like it.
Not so much the wheels but the colour, rear wing and other detail works well together.

[FA-13-RS]

Love the photo out at puckys

[timmo]

']I like it.
Not so much the wheels but the colour, rear wing and other detail works well together.

thanx mate,most people either love it or hate it.

[timmo]

Love the photo out at puckys


not at pucky's mate :eek:


4 of them taken down at a park in cudmirrah near sussex inlet and one down at oily's near the steelworks

[XXXR]

sweet looking wagon dude!!

[smoov]

I too like this wagon. Not a fan of the wheels, but the quality, tidyness (and colour) of the car overcome it very well!!

two thumbs up

[timmo]

thanx guys........

always good to hear positive feedback

[Baz Sta]

I love the bling look with that colour!!! x10 for hotness!!

[FA-13-RS]

not at pucky's mate :eek:


4 of them taken down at a park in cudmirrah near sussex inlet and one down at oily's near the steelworks
That 2nd one with he wooden bridge looks so much like puckys. Managed to get it out on the oilys gravel patch yet?? there is so much fun to be had in the AWD wagon!

[timmo]

can't say that i have been on the gravel patch......bit scared as i've just repaired the few minor stone chips/scratches on the car and would hate to give it some new ones.

i like it too much to thrash it

[NRGIZE]

clean as, don't mind the colour also :tu u don't see them rims much but yea good on ya for buying it. not over done at all :P

[timmo]

Some new pics added.

hope you guys like them

Nathan

[Jim]

seen/touched/heard this wagon before , very neat and tidy , lets get some black silver edged lightweights on there :D

[rs guy]

wow that shot at night looks hot the :eek:
nice wags man :tu

[Rallyeee]

can't say that i have been on the gravel patch......bit scared as i've just repaired the few minor stone chips/scratches on the car and would hate to give it some new ones.

i like it too much to thrash it

This is why blingy cars are bad.

[timmo]

seen/touched/heard this wagon before , very neat and tidy , lets get some black silver edged lightweights on there :D


lookin at a rim change in the not-too-distant future mate,just unsure of what i want.

i'm not usually a fan of chrome (especially the wheels on it at the moment) but i think its what would probably suit the car the best with the colour choice.

[Legacy555]

great looking wagon there timmo .the colour looks good

[timmo]

This is why blingy cars are bad.


blingy or not i just don't like breakin' stuff.

had plenty of fun thrashing/breaking numerous V8's i've owned over the years (gearboxes,diffs etc)........this ones more a comfortable cruiser for me.

maybe i'm gettin' old too quick? :confused:

[Jim]

lookin at a rim change in the not-too-distant future mate,just unsure of what i want.

i'm not usually a fan of chrome (especially the wheels on it at the moment) but i think its what would probably suit the car the best with the colour choice.

suited Aram though :D

[Rallyeee]

maybe i'm gettin' old too quick? :confused:

Definately. Go and break some stuff :tu :D .

I can completely understand just wanting a comfortable cruiser but there's been some money spent there for performance, kind of a waste if you're overly careful. I think you need to do some gravel donuts.

I'm not a fan of the wheels or BOV but I like the rest, it appears to be done well.

[timmo]

Definately. Go and break some stuff :tu :D .

I can completely understand just wanting a comfortable cruiser but there's been some money spent there for performance, kind of a waste if you're overly careful. I think you need to do some gravel donuts.

I'm not a fan of the wheels or BOV but I like the rest, it appears to be done well.


yeah as said above,wheels are gonna be changed as soon as i find a suitable replacement......

and as for the bov,its a dual port but i've got it running atmo at the moment until i get an intake pipe welded up with a port to plumb it back.i got rid of the vee port that was on it cause i'm getting over the noise real quick

[Marv]

I rikey the colour... :)

[mitch]

I rikey the colour... :)

me too! But needs to loose the chromies :wink:

[Mickey]

Very tidy wagon dude!

I like it, even with those wheels!

-Mickey

[XXXR]

nice!

rims suit it too :D

[timmo]

thanks for all the positive feedback guys,as most of you would know,paint,rims and fmic were on it when i got it,i've just been doing heaps of underbonnet stuff (power fc,coils,bov,catch can,strut brace etc etc,the list goes on and on)and brake upgrades etc.

also a few minor things i replaced as they weren't up to my standard.(i just like things done properly) painting and detailing as it had a few scratches,and i like playing with my airbrush

redid most of the interior too as it needed it and changed the entire sound system just to neaten it up and have some good quality gear.


now to enjoy it!

[timmo]

New pics in first post added,taken after respray and a few other little mods.

[rs guy]

i like the plates very creative :D

[Jarrod|crzyrs|]

Definately looking good now mate. Top effort.

[downpour]

Car looks very clean, Im not a fan of chrome but each to their own.
I think wheels along these lines will set the car off

http://img.photobucket.com/albums/v685/sepialane/RS3.jpg

[timmo]

Couple of new interior pics added :)

Thanks for the comments so far guys.

Those 'chopped rims don't look too bad.

[BOL51E]

now thats hot! lovin it

[evil_rex]

hot wags you hvae there mate..but get those chopped wheels!!!!!

[timmo]

I have made a few minor additions to my car over last few months or so which i thought are worthy of addition.

It is now sporting a rotated VF23 which i fitted with a Turbo Blanket,Stainless Braided Oil Feed line and Heat wrapped dump pipe.At the same time i fitted an Apexi Pod and an MRT Alloy Header Tank.All vacuum hoses were replaced,re-routed and tidied up using Turbosmart silicon items.

I also made a custom aluminium bracket for the Battery and upgraded my Dual Port BOV from 25mm to 32mm.

I got sick of the sloppy gearshift so i replaced all of the bushes and modded the shifter for a shorter throw.........massive difference!!

I also recently snapped one of my rear sway bar to chassis mounts so i upgraded them to the H/D Whiteline ones and at the same time fitted H/D Whiteline Alloy links and D bushes front and rear.The car already had 22mm front and 20mm rear bars fitted.

The brakes have since been changed to '04 WRX 4 pots and Slotted/Dimpled RDA rotors front and rear.I still have a set of Braided brake lines (cheers DJA) to go on which i'll do when my Cusco Brake Cylinder Support Bracket arrives from Nengun.At the same time i did the brakes,i did all wheel bearings and brake pads seeing as i had it in bits anyway and figured it was about time they were done.

I made up a custom bonnet scoop out of a damaged one i had (thanks naif) where i resin filled the lip that runs around the base of the scoop and removed the vertical grilles in the centre.Painted it up and fitted and it looks sweet.I just wanted a more smoother look like the Gen2/3 scoops without hacking the bonnet up.

I'll get some current pics up in the next few days as i'm still putting the car back together after i re-sprayed the passenger side due to someone scratching the crap out of it with a pushbike.

[nick e[v]ans]

Sounds awesome mate. Can't wait to see some pictures of it all. Good luck with the repairs.

[BenTZ]

the wheels in the chop are from a wrx WRP10. they look ok, but need a polished lip on them.

[timmo]

the wheels in the chop are from a wrx WRP10. they look ok, but need a polished lip on them.


My thoughts exactly.

Got a few rim ideas in mind,just gotta brush up on my photochopping skills :wink:

[BlackDiamondCity]

the wheels in the chop are 18" wheels called mamba hyper black.
http://customwheeltyre.com/gallery/d/703-3/Black_Mamba_HTC016__BRZ__001.jpeg?g2_GALLERYSID=c9 3bef6ffb5cbba98706fa868a22c892
seen a few GC8's with them on.

[Jim]

nath i wanna see this bonnet scoop!!

[BenTZ]

they are also used by subaru in 17 inch on the wrp10.

[hendo]

they are also used by subaru in 17 inch on the wrp10.
No they aren't.

[timmo]

nath i wanna see this bonnet scoop!!


All in good time Jim :D

I'll try to get some pics up soon.It aint drastically different,just a few subtle changes that i think set it off nicely and give a more smoother look.

Very easy to do aswell,just helps to have a spare just in case :wink:

I may do the same to my original one thats in my shed if i decide i don't want to keep it.

[BlackDiamondCity]

I hate to burst your bubble...
But those wheels are not the WRP10 wheels and dont even look that similar to them.
They are tight looking wheels and I think would set your wagon off.
cheers

[Jim]

I hate to burst your bubble...
But those wheels are not the WRP10 wheels and dont even look that similar to them.
They are tight looking wheels and I think would set your wagon off.
cheers

hate to burst your bubble ..

http://i73.photobucket.com/albums/i213/captaingx/ChevShow032.jpg

[bigboyscottyb]

haha... snap... good on ya jim, this car is hotness the attention to details is amazing inside and out

[Marv]

I like bursting bubbles :)

http://www.webwombat.com.au/motoring/news_reports/subaru-wrx-wrp10.htm

http://img505.imageshack.us/img505/8831/subaruwrxwrp101ns5.jpg

The WRP10 used RAYS rims. The rims on that chop used to be sold by SSW as the "Mamba".

[Jim]

-crawls back under rock-

[BenTZ]

inever meant that exact rim, i meant the style, ie 5 spoke and charcol, dont worry jim,some people (mr 7 posts over here ) need self gratification by always being right. i was simply pointing out that the style has already been used on subarus, nothing more

[steve83]

nice car timmo. drive slowly :)

[BlackDiamondCity]

I was just pointing out as I know the wheels and realy think they would look amazing on the wagon.
So by saying they are one thing when they are not just gets confusing...
Before you act all "I post more so I know more"
look back at your posts


the wheels in the chop are from a wrx WRP10. they look ok, but need a polished lip on them.


they are also used by subaru in 17 inch on the wrp10


inever meant that exact rim, i meant the style, ie 5 spoke and charcol

I may be new to the forum but I am not new to the subaru world. This is about Timmo's ride not us.

So Timmo, I think that wheels like the mamba would look amazing on your car. Depending on cash flow a set of Prodrive GC-07 would also look tough.these ones (http://www.rampant.net.au/shop/product_info.php?cPath=22_40_52&products_id=197)

cheers

[smoov]

^

What he said.


Looking forward to some fresh pics Timmo :)

[Walsh]

Love this wagon so much! If you ever want to sell it keep me in mind! lol

[Raymondo]

Timmo its Tim, Dans [DJA] mate.Ask your mate how much he wants for a cash job to give my brumby a lick of paint.

[timmo]

Hey people,New pics and current specs updated in first post. :)

[RSwagz]

so very nice.

loving the quality of the ride everything looks so tidy

well done mate.

[mutnose]

the modified bonnet scoop looks tits mate.

have you got a brand/part no. for the turbo blanket.
im looking for one for a td05 and id assume it would be of very similar size to the vf23.

car looks awesome btw, what steering wheel is that?

[timmo]

Thanks for the comments guy's.


the modified bonnet scoop looks tits mate.

have you got a brand/part no. for the turbo blanket.
im looking for one for a td05 and id assume it would be of very similar size to the vf23.

car looks awesome btw, what steering wheel is that?



The Turbo Blanket is to suit the VF series Turbo's from www.horsepowerinabox.com

It should go pretty close to fitting a TD05,i had a look when i took my TD05 off and i think it should do it.I asked them (horsepowerinabox) when i enquired if it would fit a TD series also but they couldn't tell me as they hadn't tried it either.

The steering wheel is a MOMO Corse Pilota item.Very comfy to drive with and not too pricey either.

[Raymondo]

Nice work on the seventh photo,very pro

[timmo]

She still has a few other goodies to go on aswell.

Got a Sard FPR,440's and a Parallel Rail set-up ready to go in when i get time.Followed by a Z32 AFM (when i find one...........or start looking) and a Dynotune.

Once all that is done i'll be in the market for some new Rims and possibly a Re-trim.

It never ends.......

[steve83]

Tim your car is :tu :tu :tu :tu

do u have anymore pics of your car anywhere?

its so clean, n tidy. good on ya :)

[Karl]

The level of detail on this car is nothing short of Amazing. Pat yourself on the back Fcuking Brilliant. Although could use Ricer Black Wheels :)

[timmo]

Thanks fella's.

Should have some new pics in the next couple of months after a few more subtle body mods and a new set of rims.............that aren't chrome.

[steve83]

thats cool. what ever you do to this car it just looks sensational :)

[SII.11K]

this is my fav rs ever ever ever

[poweredbyrice]

what is it and where do i get one?


http://img205.imageshack.us/img205/4179/img2403rx7.jpg

[yods]

wtf timmo, whats all that red spaghetti in your engine bay.

It's a TT engine cover I believe.

[timmo]

wtf timmo, whats all that red spaghetti in your engine bay.

It's a TT engine cover I believe.


It's my new set of "custom" plug leads........look sweet as bro :rolleyes:

Yes,it's a TT engine cover thats been hacked in the right places to make it fit.It's secured to the donk using a few custom brackets i knocked up out of aluminium.

[Marv]

This thing is well-wicked. I rikey a rot.

You know, T-man, with bleck wheels it'd be H11ty (aka hotness to the power of 11ty)

[timmo]

I would have thought that it isn't brown enough for you Marv?!?!?!

[Marv]

The appeal of a well-sorted, immaculately presented and fastidiously cared for street machine hath no end from where I position my delicate posterior. However, the idea of a foul, manky, tramp-like vehicular obscenity coated a particularly disgusting shade of horrid dusting precocious and prettier pieces of engineering snobbery of far higher appraisement is something that stirs a rumbling from deep within my loins...

[BAGG1N]

hey man i only relly just looked at your wagon. looks so good. colour is awesome. so tidy. im sure it packs a fair punch too :)

[kezza]

nice wagon mate, been waiting for a few closer pics of this one...looks mighty fine, i can appreciate the edges, etc. just the way i look at my car, if it isn't 'perfect' it needs to be changed asap..
cheers
kez
ps..nice STi cap on the 'header tank or catch can'.. didn't think anyone sported the old sti cap :)

[timmo]

Here's a few more pics of my sh1tbox since i fitted some JDM side indicators and JDM tail lights (cheers for the tips on clearing the lenses Ben :tu ).................still waiting on my rims though.

Not Happy :mad:

http://i118.photobucket.com/albums/o102/timmors/rspic1.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic3.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic2.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic7.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic8.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic6.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic5.jpg

http://i118.photobucket.com/albums/o102/timmors/rspic4.jpg

[Mouse]

lookin clean as mate, what rims did you buy?

[timmo]

Haven't forked out any cash for them as yet Mouse,they are just a set of no-name Shadow/silver Mesh type rims that are apparently still 6-8 weeks away.

[timmo]

pics now updated in first post.

[BenTZ]

looking the goods mate , a few bits of jdm flavour for the trainspotters ;)

[kezza]

throw some dirt on it, and chip the paint a bit, soo it looks normal

[ballistix]

Ah timmo, your car looks absolute fantastic!!

Good to see someone FINALLY making the clear lenses for their JDM side indicators!

[timmo]

throw some dirt on it, and chip the paint a bit, soo it looks normal



Looks normal to me. :)

Stonechips are the reason i resprayed it in the first place...................yes,I am a perfectionist.





Ballistix,93tz.......thanks for the comments :tu

[BenTZ]

did u get that spare in mate?

[4ce_full]

Stonechips are the reason i resprayed it in the first place...................yes,I am a perfectionist.


Trust me this comment is definately NOT a lie... hahaha.

Looking Great nath, i cant believe how much the new wheels are becoming a hassle just to get in, i have seen a 'chop' with the new wheels, and they look great.

Keep us posted mate as the modding continues.

[timmo]

Haven't had a real good go at it yet Ben,i'll probably try and make a false floor if i could be fcuked.....i'll have a good look at it and see how it goes.It doesn't miss by much though.

Cheers for the comments Josh.Did i show you a "chop" with the rims when you were down here? Fcuked if i can remember!


And yes,it is bull$hit how long they're taking to get in :td

[BenTZ]

maybe get a second hand 215/35 18 tyre, i have a 18 inch spare with smaller tyre and it fits no worries mate.

[timmo]

maybe get a second hand 215/35 18 tyre, i have a 18 inch spare with smaller tyre and it fits no worries mate.



Thats the size you are using yeah?

If so i'll try and locate one somewhere.

[BenTZ]

yeah mate, same as the size on your car ;) most small/ medium cars use these on 18s, try tempe when you get your rims if you can hold off until then.

[timmo]

Sweet.

Definitely won't bother with modifying the spare wheel cover/floor then.

[kezza]

what rimsies are you getting buddy ??
cheers
kez

[timmo]

Just a set of 18" Mesh Rims in a Shadow/Silver finish...............hopefully soon.

[mick88]

love it all very nice car timmo

[timmo]

Car is now sporting an Exedy Clutch and a Lightweight Xtreme Chromoly Flywheel............................





........................and still waiting for new rims to be available.

[BenTZ]

any noticeable differences with the fly?

[timmo]

Seems to be more responsive off-boost but not a great deal of difference in other areas.Revs drop a tad quicker between shifts.

Nowhere near the difference that some have claimed by using the lighter ~4kg aluminium flywheels but its exactly what i was after,something that did a better job than the factory unit but didn't affect driveability too much.It's around the 6.3kg mark.

[abzy]

looks sex mate... congrats..

porb a silly quiestion, but how come you rotated the turbo?

[timmo]

looks sex mate... congrats..

porb a silly quiestion, but how come you rotated the turbo?

I wanted to get rid of the 180 degrees worth of bends after the turbo that is associated with most FMIC installations.

Basically it just allows you to have less pipework to the FMIC core with a more direct path out of the compressor housing.

Probably makes 3/5 of fcuk all difference performance-wise but definitely neatens up the engine bay in my opinion.

[05-BROCKY-05]

Looks hawt mate, really love the custom stuff done to it and the colour is amazing.

[GX-LIBERTY-GX]

love this wagon soo much..... one thing it needs :D

A nice STi lip at the front in gloss black :D

good work mate would love to see some pics of the build up

[timmo]

good work mate would love to see some pics of the build up


there's some pics from when i started stripping it and when it rolled out of the spraybooth in this link;

http://www.rslibertyclub.org/forums/showthread.php?t=70067

[Blackout]

Can i have contact details for JDM gear?
i want a set of tail lights n side indicators :D

[timmo]

Can i have contact details for JDM gear?
i want a set of tail lights n side indicators :D


from memory i got my lights off trademe.

[GX-LIBERTY-GX]

there's some pics from when i started stripping it and when it rolled out of the spraybooth in this link;

http://www.rslibertyclub.org/forums/showthread.php?t=70067


thanks mate

again top work !!

[Blackout]

any new pics on the paintwork tomo!
keen to see how your ride's doing!

[timmo]

Front page of this thread is how it sits today.That is the finished product.The old colour was more of a green base as opposed to it now where it's primarily blue.

It was a similar colour prior to painting,I just wasn't happy with it and decided it needed a freshen up with a bit of a minor tweak to the colour of the base.

[Blackout]

your work has not gone unappriciated mate.
thats fantastic example of hard work and alot of money hehe

alot of my mates say to me, why do you look after your car as much as you do.. its just a old subaru..
but its not what you have its how you treat it!

and your cars a fine example of that! :D +1

[timmo]

your work has not gone unappriciated mate.
thats fantastic example of hard work and alot of money hehe

alot of my mates say to me, why do you look after your car as much as you do.. its just a old subaru..
but its not what you have its how you treat it!

and your cars a fine example of that! :D +1


Thanks mate.

Always nice to hear positive feedback. :)

[91libbygx]

nice car bro
love the colour
post up some new pics
really keen to see the new rims:D

[timmo]

Thanks mate.

Rims never came......got dicked around by people saying "they'll be here in 2 weeks" everytime I called and after about 3 months of waiting I gave up looking.I put my money into buying a house instead.

I may look at some new ones in the future when she's due for tyres but for the time being,it'll stay as is.

The RS still sits as it is in the pics.

I got it to a stage where i'm happy with it and now enjoy just driving it.I find it hard to part with a few grand for rims now,would rather spend the cash on my kid.

[91libbygx]

Thanks mate.

Rims never came......got dicked around by people saying "they'll be here in 2 weeks" everytime I called and after about 3 months of waiting I gave up looking.I put my money into buying a house instead.

I may look at some new ones in the future when she's due for tyres but for the time being,it'll stay as is.

The RS still sits as it is in the pics.

I got it to a stage where i'm happy with it and now enjoy just driving it.I find it hard to part with a few grand for rims now,would rather spend the cash on my kid.

OH ok
i hate wen that happens
my bro has the same problem
his rims are fake chrome
:td and have fudgin mould on em
but check out my threads
under my ride:)
and My Bros Ride

cheerios jordan

[cameron]

spotted this today at work in bunnings car park while i was bludging lol looks so good in the flesh the colour looks really good in the sun light

[timmo]

spotted this today at work in bunnings car park while i was bludging lol looks so good in the flesh the colour looks really good in the sun light


Thanks mate. :) Yeah,she looks alright in the sun.

Which Bunnings are you at?

Did the Illawarra Bunnings crawl today (Wollongong/Warrawong/Shellharbour) looking for various sh1t and everyone of them had sold out of what I was after! :td

[cameron]

im at the wollongong store. yea doesnt suprise me that we didnt have it haha. was sposed to be getting trollies but was drooling over the car instead.

[timmo]

im at the wollongong store. yea doesnt suprise me that we didnt have it haha. was sposed to be getting trollies but was drooling over the car instead.


Glad you liked it mate..................it is somewhat of an acquired taste.

[timmo]

Keep an eye out in the "Cars for sale" section.

A thread "may" be up soon. :wink:

[timmo]

Here 'tis.

http://www.rslibertyclub.org/forums/showthread.php?t=87520

[4ce_full]

Nath Don't do it :(
This car is close to perfect

[timmo]

Nath Don't do it :(
This car is close to perfect


Gotta do it mate..........

Need something a bit more family friendly and capable of towing.I'd love to keep it aswell but can't justify 2 rego's/insurances etc for the minimal use it gets.

However,once it goes,I plan on satisfying my toy habit with a new Sea Doo Speedster. :)

Good times. :tu

[4ce_full]

Gotta do it mate..........

Need something a bit more family friendly and capable of towing.I'd love to keep it aswell but can't justify 2 rego's/insurances etc for the minimal use it gets.

However,once it goes,I plan on satisfying my toy habit with a new Sea Doo Speedster. :)

Good times. :tu

Good call on the boat, if its got a wake tower strapped to it i got a license and petrol money and a few boards.... and a fiance that i have trained up well on how to clean the boat haha.
My liberty never gets used either, seems like everytime i get a chance to take her out its double demerits and i have to drive it like a skirt.

[timmo]

Good call on the boat, if its got a wake tower strapped to it i got a license and petrol money and a few boards.... and a fiance that i have trained up well on how to clean the boat haha.
My liberty never gets used either, seems like everytime i get a chance to take her out its double demerits and i have to drive it like a skirt.


Yeah mate,they're great fun.Been wanting one for a while so now is the time.

As for the car,it's not really suitable for the more family orientated things I want to be doing (towing a boat,camping etc).Unlike the car,with a boat the whole family can be a part of it.The mrs is getting her licence now so we need an automatic for her to drive.Plus,I have had it for almost 4 years.The longest i've ever owned 1 car.

I have very limited space at my house so having both is not an option.

[cameron]

thread revival for an awesome car spotted this today sporting new wheels. where is Bart put up some photos.

[BenTZ]

sweet, what wheels does it have now?

[alexxx]

thread revival for an awesome car spotted this today sporting new wheels. where is Bart put up some photos.

havent seen the new wheels yet but i do see it around town every now and then!

[timmo]

Seems like a very short love affair for the new owner,Looks like its back on carsales again!

[cameron]

ohhhhh devo i actually considered selling my rex for a minute i love this car i dont know what it is about it.

[Matty_Lib]

Messaged him before, soldddd. I was keen on this :( Anyone know where it ended up this time?